ID this laodout anyone?

Discussion of load-bearing equipment, tactical gear, holsters, BDUs, and other gear related to Airsoft.

ID this laodout anyone?

Postby Stray » Sat Oct 29, 2011 11:10 pm

http://airsoftpacific.com/viewtopic.php?t=33890

I can't post photos from my phone but can anyone ID everything in this kit? This is just about everything I've been trying to do with a LT6094 but with a EBR. I just found this photo tonight lol. What's all there? It looks way different then what I built and how is that m1014 being lanyard and held in place? I'm getting ready to now start over with a m4 or m249 as a primary depending on tasking given for that game. So I will need to redo all my pouches and pry off all the TT pouches. Unless those are TT pouches there? Is that a 6094 or is it a ciras maybe? [/img]
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby Stray » Sat Oct 29, 2011 11:31 pm

Ok ciras land then? What about that leg rig? Looks way larger then my condor one and attaches better too. How about the pouches on his side? Grenade or mag they look odd sized? I figured a triple m4 on the front with admin on top maybe a single m4 or utility pouch would cover the front completely and u guess that's a rip away med next to his pack right?
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby Stray » Sat Oct 29, 2011 11:42 pm

Holy cow I didn't realize there was that much room on a ciras! Sorry I know off topic but I have so much extra room on my LT as it is. Any idea where I could find that shot gun restraint thing he has?
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby Stray » Sun Oct 30, 2011 1:54 am

Ok well I wasn't as far off on my guess list as I had thought then as for it all being EI that's what confused me the most a lot of it doesn't look like what i have its a little lighter then my EI stuff. But probably because the ones in the photo are being used and sun faded a lot more then mine.
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby Stray » Sun Oct 30, 2011 2:01 am

Arid marpat helmet cover but is that a IBH or a MICH? I was wanting to do a RAID bump helmet with a faded snake skin paint job to give it the well worn look. But not sure if it would be legit.
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby Stray » Sun Oct 30, 2011 2:07 am

Thanks for the help too Nasty. Really saved the day on this one I was going the complete wrong direction on 75% of it all. Once I can get the info on the shotgun rig thing I can probably throw this together a lot sooner then I thought.
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby Stray » Sun Oct 30, 2011 2:21 am

I'll just find a used one then the replicas used dont cost to much and ill spray paint it. The knee pads are probably what's the brand HTL or somethin like that right? I've seen them at the fox hole before.
Pistol I'm guessing is a m9 or most likely a 1911 probably a Kember tactical.

So m4 pouches
M9 pistol pouches since the 1911 mags are skinny I could double up maybe?
The pouch list you have
Ciras
Mich2000
M4
M9 or 1911
Eotech 553 maybe?
Surefire front grip
Peq box
M1014
Oakley gloves maybe?
Saftey glass sunglasses
Pads

Sounds right?

Any idea what that odd tube pouch is under the frag pouches with the "T" velcro on it could be? I've never seen a pouch like that so I wanst sure if it was a extra dump pouch for some reason or if that is a special pouch for a scope or something wacky
Last edited by Stray on Sun Oct 30, 2011 2:35 am, edited 1 time in total.
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby Stray » Sun Oct 30, 2011 2:36 am

It's better then what my new team lead said lol he called em.hockey pads.
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby Darius137 » Sun Oct 30, 2011 4:52 am

Image
Member of Rushing Russians KBДB (Cascadian VDV/Airborne) chapter.
https://www.facebook.com/groups/KEBAB.PARTY/
User avatar
Darius137
1337
1337
 
Team: RR KBAB
Posts: 7790
Age: 42
Images: 1
Joined: Tue Mar 01, 2005 9:24 pm
Location: OR

Postby Stray » Sun Oct 30, 2011 11:47 am

Darius137 wrote:http://www.condoroutdoor.com


That sling looks right. I'll probably get that one f I can.
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby Stray » Sun Oct 30, 2011 11:52 am

Nasty wrote:He's using a 552, I think. I want to say the pouch below the frag pouches is a shotgun pouch, but I'm not sure. Probably a shotgun pouch considering he's packing a 1014.

MARSOC/FR has been moving more to the M9 over the 1911 recently, though I don't know the timeframe of this picture so I'm not sure if he'd be using an M9 or a 1911.

As for the pads, they're not really necessary. If you do want them, any old ones will do.


Well I was going to go cryre probably go with a arid marpat or that air tiger AOR combat shirt and pants rip off. I want to make this as up to date as possible so I guess ill do a m9 if that's the case.
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby Snowman » Sun Oct 30, 2011 1:46 pm

MFR/MARSOC has been using M45s as a sidearm forever. AFAIK they only ever used the M9 in very limited quantities, so I'd bet you those pouches are for .45 mags (they look the same).

Also, that's a 552 and what looks like a DBAL, and he's wearing a FSBE leg panel.
top lel
User avatar
Snowman
1337
1337
 
Team: N/A
Posts: 2078
Age: 29
Images: 16
Joined: Wed Oct 21, 2009 9:14 pm
Location: Olympia

Postby Stray » Sun Oct 30, 2011 2:04 pm

What is a easy way to get a ciras land in CB pantac or flyye maybe? I cant afford a real one.
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa

Postby chilicon » Sun Oct 30, 2011 2:18 pm

I purchased one from AirsoftSmith a while back. It was pretty reasonably priced and good quality, too. I would look into getting one there.

If you're not dead set on the CIRAS I would look into something different. They are quite hefty and don't have very good ventilation, either.
chilicon
Grunt
Grunt
 
Team: N/A
Posts: 70
Age: 31
Images: 1
Joined: Thu Sep 23, 2010 4:12 pm
Location: Issaquah, WA

Postby Stray » Sun Oct 30, 2011 4:08 pm

[quote="
If you're not dead set on the CIRAS I would look into something different. They are quite hefty and don't have very good ventilation, either.[/quote]

I would be wearing a soft armor pads under it as it is. In so darn skinny and small nothing I've ever gotten. Fits right with out it. I also have a LT6094 from pantac right now. So I'm use to no ventalation
User avatar
Stray
Soldier
Soldier
 
Team: N/A
Posts: 234
Age: 37
Images: 21
Joined: Sat Nov 20, 2010 1:11 pm
Location: Milton wa


Return to Tactical Equipment

Who is online

Users browsing this forum: No registered users and 2 guests