GBB magazine takedown

[ogrejager]

Details: KWA M9 extended NS2 magazine.
Diagram:
http://store.kwausa.com/images/diagrams ... vy_mag.jpg

So the damn thing came leaking from the fill valve. I hear this is not uncommon. So, I pulled the plate off to bottom and unscrewed the valve (#111). I lubed it and reassembled it. Still leaks.

I figure the next step is to remove parts 929, 906 and 908 and lube 908.

How do I get those pieces out? I've tried prying them up, shaking the mag, etcetera. What boneheadedly simple step am I missing?

[Jester316]

Did you punch out the 2 pins on the base of the mag? They lock part 929 into the mag body.

[ogrejager]

No.

Thank you. Told you it was boneheadedly easy. Those parts are not on the schematic for the extended mag, although now I see 'em on the regular one.

[Raging Hormann]

I'm assuming you removed the pins from it?

I would try taking a hook and probe set, use the 90 degree one in this picture to pull it out.

Have you tried teflon tape in the threads?

Edit: Jester beat me to it.

[Jester316]

They probably assume that you'll see the holes for them that are covered by the base plate. Goes to show why you should never assume something will be seen on a diagram.

[ogrejager]

I'll be a sonofabitch. It doesn't leak anymore.

Thanks again, thread over.