Browning M2HB with M63 mount

Discuss your own custom works and projects here.
Post a reply

Postby quigly » Thu Oct 07, 2010 11:02 pm

Then you will have to redo the plans a bit, to fit the diferent gear box and motor. Is it a vertical or horizontal motor?
My father once told me, "Some times all you have is a bullet and a prayer, don't miss."
User avatar
quigly
Specops
Specops
 
Team: N/A
Posts: 1230
Age: 31
Joined: Sat May 23, 2009 7:35 pm
Location: Lacey, wa
Top

Postby Arbiter » Thu Oct 07, 2010 11:24 pm

its a horizontal motor I think I will be able to fit it in the only thing I cant quit figure out though is a feeding system.. any ideas anybody? I wanna be able to fit it in a .50 cal ammo box and be hidden by a fake belt of ammo..
"Ah you kids are all the same these days.. All you want is a gun you saw on Modern Warfare 2... Noobs.. Everyone knows Modern Warfare 1 was wayyy cooler! Besides They had the g36 in there!!"
User avatar
Arbiter
Grunt
Grunt
 
Team: N/A
Posts: 73
Age: 31
Joined: Sat Sep 11, 2010 9:42 pm
Location: Marysville WA
Top

Postby Arbiter » Thu Oct 07, 2010 11:32 pm

Also Wiki says it has a 45 in barrel is this true? cause I can do that =D
"Ah you kids are all the same these days.. All you want is a gun you saw on Modern Warfare 2... Noobs.. Everyone knows Modern Warfare 1 was wayyy cooler! Besides They had the g36 in there!!"
User avatar
Arbiter
Grunt
Grunt
 
Team: N/A
Posts: 73
Age: 31
Joined: Sat Sep 11, 2010 9:42 pm
Location: Marysville WA
Top

Postby quigly » Thu Oct 07, 2010 11:49 pm

Use a m60 box mag base, or a m249, and cover it in the .50 case.
My father once told me, "Some times all you have is a bullet and a prayer, don't miss."
User avatar
quigly
Specops
Specops
 
Team: N/A
Posts: 1230
Age: 31
Joined: Sat May 23, 2009 7:35 pm
Location: Lacey, wa
Top

Postby weasle8877 » Fri Oct 08, 2010 9:05 am

Don't quote me on this, but I think that the AGM Mp40s have V7s in them.
User avatar
weasle8877
Soldier
Soldier
 
Team: N/A
Posts: 474
Age: 32
Joined: Mon Nov 26, 2007 10:21 pm
Location: Fairbanks Alaska
Top

Postby LiberalPacifist » Fri Oct 08, 2010 10:56 am

The reason it has to be an M14 or an M249 is because the gearbox chassis is linked to the hopup/barrel, and its also horizontal motor (this is maybe only applicable to the 30 cals, receiver not tall enough). but the important part is its all one piece. I just got a used AGM M14 for $50 and replaced all the internals for "high torque" Chinese stuff about another $50.

As for feeding, killbucket devised an ingenious system of using a slightly modified servo (the kind you may find in an R/C car) and a high cap with a winding key hole. this apparatus is contained inside a plastic box which is in turn hidden inside the ammo can of an appropriate type, covered in bbs to feed.
Image
User avatar
LiberalPacifist
Soldier
Soldier
 
Team: {FAG}
Posts: 200
Age: 33
Images: 3
Joined: Thu Jan 31, 2008 9:42 pm
Location: Eugene, OR
Top

Postby weasle8877 » Sun Oct 17, 2010 2:26 pm

http://www.6millimeter.info/joomla/inde ... &Itemid=55
this was posted on airsoftnews.eu this morning.
User avatar
weasle8877
Soldier
Soldier
 
Team: N/A
Posts: 474
Age: 32
Joined: Mon Nov 26, 2007 10:21 pm
Location: Fairbanks Alaska
Top

Postby league 4 » Sun Oct 17, 2010 3:35 pm

weasle8877 wrote:Don't quote me on this, but I think that the AGM Mp40s have V7s in them.


They do not.
User avatar
league 4
Specops
Specops
 
Team: 9/G
Posts: 1980
Age: 32
Images: 1
Joined: Sun Aug 05, 2007 7:27 pm
Location: Fort Knox
Top

Postby Sixxgun » Sun Oct 17, 2010 3:56 pm

weasle8877 wrote:Don't do ABS plastic, it sucks. I've seen, held, played with KB M2's and they are just crappy. They look cool from a distance, but up close you can tell its cheap plastic. Moving it around in a cradle mount makes it feel like it's gonna break. Also, a M2 that you can hold with one hand is just plane silly. I'd say use those template, but make it out of steel. It'd cost more but it'd be worth it in the end.


That's Blashamy KB is King LOL
User avatar
Sixxgun
Ranger
Ranger
 
Team: N/A
Posts: 644
Age: 44
Images: 6
Joined: Fri Mar 04, 2005 12:48 pm
Location: Albany,Oregon
Top

Postby Bloodshot » Sun Nov 07, 2010 1:32 pm

HOLY SHIT i want one lol keep us posted on this man
Image
though i walk through the valley of the shadow of death i fear no evil because i am the most bad a$$ mother stinker in the valley...
User avatar
Bloodshot
Soldier
Soldier
 
Team: N/A
Posts: 161
Age: 30
Images: 6
Joined: Sat Jun 12, 2010 5:53 pm
Location: woodburn oregon
Top

Postby Duniway » Sun Nov 07, 2010 1:38 pm

Nice Necro!
User avatar
Duniway
Soldier
Soldier
 
Team: N/A
Posts: 311
Age: 28
Joined: Thu Nov 05, 2009 7:16 pm
Location: McMinnville
Top
Previous
Post a reply

Return to Custom Projects

Who is online

Users browsing this forum: No registered users and 3 guests